@article { author = {Lashkarbolouki, Ebrahim and Kahneh, Ehsan and Mosavi Kopar, Abdollah and Amanzadeh, Beytollah}, title = {Adaptability of new open crown poplar clonesin Lasht-e Nasha area, Gilan province}, journal = {Iranian Journal of Forest and Poplar Research}, volume = {24}, number = {4}, pages = {655-646}, year = {2016}, publisher = {Research Institute of Forests and Rangelands of Iran}, issn = {1735-0883}, eissn = {2383-1146}, doi = {10.22092/ijfpr.2016.109443}, abstract = {Urbanization and population growth increased the demand for wood, which can be partially supplied via wood culture. Poplar plantation with fast growing clones of poplar is thus required to investigate their compatibility and wood production potential. This study was carried out with 12 treatments (11 new clones and one control clone) and three replications in a Randomized Complete Block designto determine the compatibility and wood production in Lasht-e Nesha agriculture research station in Gilan province. In each experimental plot, 12 one-year-old seedlings were planted at a 4×4 m distance. Then the diameter growth, height, volume and survival percentage of trees were calculated, followed by a statistical analysis. The results showed good compatibility of all clones, yet with different growth quantities. The P. x. Intreramericana, P. d. Marquette, P. d. 92.258, and P. e. Ita199 with diameter of 12.8, 12.35, 10.58 and 9.42 cm and height of 11.08, 12.58, 12.22, and 10.76 m were superior compared to the control clone (diameter = 9.65 cm, height=10.62 m and volume =5.83 m³/ha). In addition, the volume production of the studied as well as the control clones were 9.35, 9.76, 6.84 and 5.11 m³ha-1 year-1 in a five year period, respectively. The survival percentage of the clones were different, with the lowest survival rate =66.6 % for P. e. Blanc de Poitou and the highest rate of 97.2 % for P. e. 45.51, P. e. 92.160, P. d. Marquette and P. e. 87m119. The clones surveyed here can therefore be introduced as competent and successful clones in the comprehensive program of agri-wood development across the study site.}, keywords = {compatibility,fast growing,growth and development,Poplar,Production}, title_fa = {بررسی سازگاری کلن‌های جدید تاج‌باز صنوبر در منطقه لشت‌ نشاء گیلان}, abstract_fa = {  توسعه شهرنشینی و رشد جمعیت، تقاضای مصرف چوب را افزایش داده است که زراعت چوب تا حدی نیاز به مواد چوبی را تأمین می‌کند. صنوبرکاری با ارقام تندرشد صنوبر، نیاز به بررسی سازگاری و پتانسیل تولید چوب دارد. پژوهش پیش‌رو در قالب طرح بلوک‌های کامل تصادفی در سه تکرار و 12 تیمار (11 کلن جدید صنوبر و یک کلن شاهد) به‌منظور تعیین سازگاری و میزان تولید چوب در ایستگاه تحقیقات زراعی لشت‌نشاء استان گیلان انجام شد. در هر قطعه‌نمونه آزمایشی، 12 اصله نهال یک‌ساله با فاصله 4×4 متر کاشته شدند. در پایان اجرای پروژه، قطر، ارتفاع، حجم و درصد زنده‌مانی درختان محاسبه شد. نتایج نشان داد که تمام کلن‌ها دارای سازگاری خوبی بودند، اما کمیت رشدی متفاوتی از خود نشان دادند. کلن‌های P. x. Intreramericana، P. d. Marquette، P. d. 92.258 و P. e. Ita199 به‌ترتیب با قطرهای 12/8، 12/35، 10/58 و 9/42 سانتی‌متر و ارتفاع‌های 11/08، 12/58، 12/22 و 10/76 متر نسبت به کلن شاهد (P. d. 69.55) با قطر 9/65 سانتی‌متر و ارتفاع 10/62 متر افزایش رشد داشتند. همچنین حجم درختان کلن‌های فوق و شاهد به‌ترتیب 35/9، 76/9، 84/6، 5/11 و 5/83 متر مکعب در هکتار در سال برای یک دوره پنج‌ساله به‌دست آمد. درصد زنده‌مانی کلن‌های متفاوت بود، به‌طوری‌که کمترین درصد زنده‌مانی در کلن P. e. Blanc de poitou با 66/6 درصد و بیشترین آن در کلن‌های P. e. 45.51، P. e. 92.160، P. d. Marquette و P. e. 87m119 با 97/2 درصد مشاهده شد. کلن‌های مذکور را می‌توان پس از تحقیقات تکمیلی، به‌عنوان کلن‌های شایسته و موفق در برنامه جامع توسعه زراعت چوب معرفی و مورد استفاده قرار داد.  }, keywords_fa = {تندرشد,تولید,رشد و نمو,سازگاری,صنوبر}, url = {https://ijfpr.areeo.ac.ir/article_109443.html}, eprint = {https://ijfpr.areeo.ac.ir/article_109443_0760643b5ec1b4f58332b9d8b27062de.pdf} }