per
مؤسسه تحقیقات جنگلها و مراتع کشور
تحقیقات جنگل و صنوبر ایران
1735-0883
2383-1146
2005-09-23
13
3
1
7
10.22092/ijfpr.2005.119447
119447
Jeld
شناسنامه
Contents
https://ijfpr.areeo.ac.ir/article_119447_84f6b06998dbbabbad44b8a8e9f53094.pdf
per
مؤسسه تحقیقات جنگلها و مراتع کشور
تحقیقات جنگل و صنوبر ایران
1735-0883
2383-1146
2005-09-23
13
3
278
251
108498
Scientific article
فنولوژی گونه برودار (Quercus brantii Lindl.) در جنگلهای استان کردستان
Phenology of Quercus brantii (Lindl.) at Kurdistan Forests of Iran
فیروز مردانی
firouz145@yahoo.com
1
بایزید یوسفی
bayzidyousefi@yahoo.com
2
کارشناس مرکز تحقیقات کشاورزی و منابع طبیعی استان کردستان
عضو هیأت علمی مرکز تحقیقات کشاورزی و منابع طبیعی استان کردستان
در این مطالعه فنولوژی گونه بلوط برودار (Quercus brantii Lindl.) در سه محدوده ارتفاعی (1400-1200 متر، 1600-1400 متر و 1800-1600 متر)، در دو جهت (شمالی و جنوبی) و در دو منطقه جنگلی بانه و مریوان در استان کردستان مورد بررسی قرار گرفت. در مجموع 10 قطعه نمونه یک هکتاری انتخاب و در هر قطعه نمونه 20 اصله درخت سالم علامتگذاری و در ماههای مختلف سال در دفعات متعدد مورد بازدید قرار گرفت و مشاهدات در جداول مربوط درج گردید. نتایج بدست آمده به طور خلاصه در مورد گونه مورد بررسی در ارتفاعات، جهات و مکانهای مختلف به شرح زیر میباشد: ظهور برگ و گلدهی هفته سوم فروردین تا هفته اول اردیبهشت- کامل شدن برگ حدود 15 تا 20 روز پس از ظهور آنها- ظهور میوه از پیاله هفته چهارم مرداد ماه- رسیدن میوه هفته دوم و سوم آبانماه- ریزش میوه تا یک هفته پس از رسیدن- شروع ریزش برگ اوایل هفته چهارم آبان - پایان ریزش برگ اواخر هفته اول آذر. همچنین کلیه برداشتهای فنولوژیکی پس از تبدیل به گذشت روز از سال در برنامه آماری minitab مورد تجزیه قرار گرفتند که نتایج نشان داد که کلیه سطوح مورد بررسی شامل سال، مکان، ارتفاع، جهت و گونه از لحاظ کلیه صفات فنولوژیکی مورد بررسی دارای اختلاف معنی داری با همدیگر بودند. ماتریس همبستگی صفات نیز محاسبه شد که براساس آن همبستگی منفی و معنیداری میان میزان بارندگی و متوسط درجه حرارت با ظهور برگ، ظهور گل و میزان گلدهی بدست آمد. همبستگی بین متوسط درجه حرارت با کامل شدن برگ، ریزش برگ، میزان گلدهی و میزان میوه دهی نیز معنی دار و منفی بود
Phenological characteristics of Q. brantii were investigated at two different sites of Kurdistan Forests (Baneh and Marivan), each at three levels of altitude (1200-1400, 1400-1600, 1600-1800 m. absl) and two aspects (North and South), during 1995-2002. Overall, 10 Plots (1.0 ha), each containing 10 healthy trees were used for recording the phenological parameters. The data were analyzed statistically, using the Minitab computer program. The species phenological characteristics were as follows: Leaf and flower buds opening period: 2nd-4th week of April, the fruits start growing at 3rd-4th week of August and Mature at 1st-2nd week of November, leaves fall at 2nd-4th week of Nov., fruits fall at 3rd-4th week of Nov. The statistical analysis showed that there were significant differences between the phenological characteristics in respect to the different site physiographical characteristics. Furthermore, there were significant negative correlations between average rainfall and average air temperature and three of the phenological characteristics (leaf and flower appearance date and flowering amount). The correlation between average air temperature and leaf mature and fall date and flower or fruit amount was significantly negative.
https://ijfpr.areeo.ac.ir/article_108498_ff77a219679365ef7b60aa117dedc5b4.pdf
برودار
فنولوژی
کردستان
Altitude
aspect
flower
Fruit
leaf
temperature
rainfall
phenology
Quercus barantii
per
مؤسسه تحقیقات جنگلها و مراتع کشور
تحقیقات جنگل و صنوبر ایران
1735-0883
2383-1146
2005-09-23
13
3
294
279
108499
Scientific article
بررسی تنوع گونههای گیاهی در ارتباط با عوامل فیزیوگرافیکی در منطقه جنگلی ده سرخ، جوانرود، استان کرمانشاه
Plant species diversity in relation to physiographical factors at Dehsorkh Woodland
هرمز سهرابی
hsohrabi@modares.ac.ir
1
مسلم اکبری نیا
akbarim@modares.ac.ir
2
کارشناس ارشد جنگل داری
عضو هیات علمی دانشگاه تربیت مدرس
تنوع گونهای یکی از خصوصیات مهم جوامع زیستی است. تنوع ارگانیسم ها، اندازهگیری تنوع و آزمون فرض هایی درباره علل تنوع از جمله مسائلی هستند که مدتهای مدیدی مورد علاقه اکولوژیستها بوده اند. در این تحقیق تنوع گونههای گیاهی در منطقه جنگلی ده سرخ با برداشت 60 قطعه نمونه 256 متر مربعی و 240 قطعه نمونه 25/2 متر مربعی و محاسبه شش شاخص تنوع و یکنواختی(سیمپسون دوطرفه، شانون، هیل، پایلو، آلاتالو و ملیناری) در ارتباط با عوامل فیزیوگرافیکی (شیب، جهت جغرافیایی و ارتفاع از سطح دریا) مورد مطالعه قرار گرفت. نتایج نشان دهنده آن است که تنوع گونهای در جهتهای شمالی بیشتر بوده و همچنین تنوع گونهای در شیبهای کمتر از 30 درصد دارای بیشترین مقدار بوده است. عامل ارتفاع از سطح دریا با تنوع گونهای رابطه معنیداری نداشت. با بررسی همبستگی تعداد گونهها در قطعه نمونه با شاخصها و همچنین روند و نقش شاخصها در مراحل مختلف تجزیه و تحلیل، شاخص سیمپسون دو طرفه به عنوان شاخص مناسب در این گونه مطالعات پیشنهاد شد.
Species diversity is an important characteristic of bio-communities. Organisms diversity, diversity measurement and hypothesis test in relation to diversity causes are issues which the ecologists are interested in for long period. The aim of the trial was to study plant species diversity in Dehsorkh woodland at Javanroud, Kermanshah province, Iran. For this reason 300 sampling plots were used from which 60 at 256 m2 and 240 at 2.25 m2 area. At each plot six diversity indices (Shannon's (H), Simpson's reciprocal, Hill's N1, Pielou's (J/), Alatalo's F and Molinari's G) with respect to physiographical factors (slope, aspect and altitude) were investigated. The results showed that species diversity was the greatest at north aspects and slopes less than 30% and there was not significant difference between altitude and species diversity. The correlation between species number and indices analysis at each plot and the tendency and the role of each index at different analysis processes showed that the Simpson's reciprocal index is a best index for such research trials.
https://ijfpr.areeo.ac.ir/article_108499_302f71e84780be02bcc563b3456450b0.pdf
تنوع گونههای گیاهی
عوامل فیزیوگرافیکی
منطقه جنگلی ده سرخ
جوانرود
diversity
physiography
species
aspect
Slope
Altitude
per
مؤسسه تحقیقات جنگلها و مراتع کشور
تحقیقات جنگل و صنوبر ایران
1735-0883
2383-1146
2005-09-23
13
3
312
295
108500
Scientific article
اثرات مستقیم و غیر مستقیم صفات مختلف صنوبر بر عملکرد آن در مراحل اولیه رشد
Direct and indirect effects of Poplar different attributes on its yield in early growth stage
فرهاد اسدی
fasadi@rifr-ac.ir
1
حسین میرزایی ندوشن
nodoushan2003@yahoo.com
2
علیرضا مدیر رحمتی
3
اعضای هیات علمی مؤسسه تحقیقات جنگل ها و مراتع
اعضای هیات علمی مؤسسه تحقیقات جنگل ها و مراتع
اعضای هیات علمی مؤسسه تحقیقات جنگل ها و مراتع
انتخاب مستقیم کلنهای برتر به منظور توسعه کشتزارهای صنوبر مبتنی بر ارزیابی محصول (تولید چوب) است. در برخی موارد به سبب محدودیتهای موجود در رویشگاه که موجب عدم تولید مناسب میگردد، امکان استفاده از این روش میسر نیست. بنابراین انتخاب غیر مستقیم با مطالعه سایر صفات فنوتیپی همبسته با محصول می تواند مفید باشد. در این تحقیق، آزمون Path برای برخی از صفات مورفولوژیکی و رویشی در سالهای 1379و1380 بر روی کلنهای صنوبر یک و دو ساله انجام گرفت. صفات اندازه گیری شده بر روی 5 پایه منفرد در هر واحد آزمایشی شامل تعداد برگ، سطح برگ، سطح کل برگها، طول پهنک، حداکثر پهنای برگ، نسبت پهنا به طول برگ، طول دمبرگ، عمق دندانه برگ، تعداد رگبرگ، تعداد شاخه، طول شاخه، قطر شاخه، قطر ساقه، نسبت قطر ساقه به قطر شاخه، زاویه شاخه، ارتفاع، تعداد ریشه، طول ریشه، تعداد برگ نوظهور و زنده مانی بوده است. بعد از حصول نتایج تایید کننده وجود تفاوتهای معنی دار بین گونه ها و کلن های آنها برای صفات مورد بررسی، آزمون Path در مورد دادههای فوق انجام گردید. این آزمون برای صفت ارتفاع به عنوان متغیر وابسته نشان داد که صفات تعداد شاخه و زاویه شاخه دارای اثرات مستقیم قابل توجه بر روی متغیر مستقل (ارتفاع) هستند. تعداد شاخه اثر مستقیم منفی زیادی بر روی ارتفاع نشان داد، اما اثر غیر مستقیم آن بر روی ارتفاع از طریق سایر متغیرهای مستقل، مثبت بود که در نتیجه آن یک اثر کل منفی به میزان 554/0- بر روی ارتفاع حاصل شد. تعداد برگ دارای اثر مستقیم مثبت زیاد بر روی ارتفاع بود. نسبت قطر شاخه به قطر ساقه دارای بالاترین اثر کل منفی بر روی ارتفاع بود و در نتیجه قطر ساقه دارای بیشترین اثر مستقیم مثبت بر روی ارتفاع بود. زنده مانی از طریق سایر صفات مستقل، دارای اثر غیر مستقیم مثبت زیاد بر روی ارتفاع بود، طوری که اثر مستقیم منفی آن بر روی ارتفاع را صورت اثر کل با میزان 667/0 تعدیل نمود. طول شاخه اثر مستقیم منفی زیادی را بر ارتفاع نشان داد، اما این متغیر از طریق اثرات مثبت زیادی سایر صفات مستقل یک اثر کل مثبت زیاد را بر روی ارتفاع ایجاد نمود. در هر حال، سطح کل برگها با اثر مستقیم مثبت زیاد و نیز اثرات غیر مستقیم مثبت زیاد بر روی ارتفاع مؤثرترین صفت بر روی ارتفاع بود که می تواند به عنوان بهترین شاخص بر روی ارتفاع در کلنهای این مطالعه معرفی شود. این نتیجه دارای ارزش زیادی خواهد بود، به ویژه زمانی که تعداد زیادی از کلنها در مراحل اولیه برنامه های کشت صنوبر وجود داشته باشند قابل توصیه است.
Direct selection of poplar clones for expanding their plantation is based on yield (wood production) evaluation. Because of limitations in site ecological characteristics which prevent desirable production, this method is not applicable. Therefore, indirect selection by studying other phenotypical characteristics which have well correlation with yield could be useful. The Path test for some of the morphological and growth factors was tested on one to two year old poplar clones seedlings in 2000 and 2001. At each experimental unit, five seedlings were selected to measure their following characteristics. Leaf number, leaf area, total leaf area, length of blade, maximum leaf width, width/length ratio, petiole length, depth of leaf rib, vein number, branch number, branch length, branch diameter, stem diameter, stem diameter/branch diameter, branch angle, height, root number, root length, new leaf number and survival. After a confident result of differences between the species and their clones, for the characters, Path analysis was performed on the data. The results showed that branch number and branch angle had great direct effects on height as an independent variable. Branch number affected the height directly and negatively at high level, but its indirect effect on height through the dependent variables, was positive. As a result, the total effect on height was negative (-0.554). Leaf number left high positive effect on height. The branch diameter/stem diameter ratio had the greatest total negative effect on height. As a result, stem diameter had the greatest positive effect on height. Survival had also a great indirect positive effect on height through independent variables, counterbalancing negative direct effects to a positive effect of 0.667. Branch length showed a high negative direct effect, but a high positive indirect effect, resulting a high positive total effect on dependent variable, height. However, total leaf area with positive direct and indirect effects on height, which is in turn the most influential character on height, would be the best indicator of height in the poplar species under study. This would be of high value, particularly when a great number of clones are under investigation at early stages of a cultivation programme.
https://ijfpr.areeo.ac.ir/article_108500_7f659c2d41d0e49b6e84787535a92a26.pdf
صنوبر
آزمون Path
صفات مورفولوژیکی
اثرات مستقیم و غیر مستقیم
Poplar
path analysis
Morphological attributes
direct and indirect effects
per
مؤسسه تحقیقات جنگلها و مراتع کشور
تحقیقات جنگل و صنوبر ایران
1735-0883
2383-1146
2005-09-23
13
3
342
313
108501
Scientific article
تخمین تراکم تاج پوشش جنگل با استفاده از دادههای ماهواره ای
Estimating forest canopy cover using Landsat7 ETM+ data
خسرو میرآخولو
khosrowm40@gmail.com
1
منوچهر امانی
2
اعضای هیات علمی موسسه تحقیقات جنگلها و مراتع
اعضای هیات علمی موسسه تحقیقات جنگلها و مراتع
در این بررسی امکان استفاده از دادههای سنجنده + ETM ماهواره لندست 7 برای تهیه نقشه تراکم تاج پوشش در چهار طبقه، %100-81 ، %80-51، % 50-31 و %30- 5 در چهار منطقه از جنگلهای شمال کشور مورد بررسی و ارزیابی قرار گرفت. با بهره گیری از شاخصOIF و تجزیه و تحلیل آماری دادهها در باندها و با توجه به اینکه باندهای 3 و 4 لندست برای تشخیص پوشش گیاهی مناسب میباشند ترکیب رنگی کاذب 3 , 4 , 5 و 2 , 3 , 4 برای طبقه بندی نظارت نشده در نظر گرفته شد. از نقشه حاصل از این طبقه بندی به عنوان راهنما جهت بازدید و برداشت مشاهدات صحرایی استفاده شد. هر یک از مناطق با شدت آماربرداری یک درصد، به ترتیب دارای 72، 34،81 ، 95 قطعه نمونه 2250 متر مربعی به ابعاد 150×150 متر بودند که بعد از تعیین موقعیت آنها اطلاعات مربوط به درصد تاج پوشش و سایر اطلاعات مورد نیاز از آنها برداشت شد. نقشههای نهایی تراکم تاج پوشش با بکارگیری اطلاعات ثبت شده از قطعات نمونه و مشاهدات میدانی با استفاده از روش طبقه بندی نظارت شده استخراج شدند. ارزیابی نقشههای درصد تراکم تاج پوشش نشان داد که صحت کلی نقشه درصد تاج پوشش استخراج شده از دادههای ماهواره ای43/85%، متوسط صحت تولید کننده 7/84% و متوسط صحت کاربر 68/82% میباشد.
The remotely sensed data is one of the most rapid methods for providing thematic maps in natural resources, especially forest. By combining ETM+ data and ground observation data, we can have access to thematic maps of forest such as canopy cover map, that it can be used in forest ecological studies and forest management and improvement. The research was conducted to evaluate and investigate the possibility of using Landsat7 ETM+ data for developing forest canopy cover density map at four classes in four sites of Caspian Forests of Iran. Based on OIF index and statistical analysis of the ETM+ data, Color composite 3, 4, 5 were selected for unsupervised and supervised classifications. Ground observation information was collected from 282 plots (150*150m), using unsupervised map as a primary map. Finally, combining the ETM+ data and the ground information, using supervised classification method, canopy cover map was achieved at four classes (5-30%, 31-50%, 51-80%, 81-100%). Evaluation of the canopy cover density percentage showed that the overall accuracy of the canopy cover percentage map developed by the Landsat7 ETM+ data and average accuracy, producer's and user's accuracy were: 85.43, 84.7 and 82.68 percent, respectively.
https://ijfpr.areeo.ac.ir/article_108501_06b4fe394974ee5dc5d88858d2670b3b.pdf
تاج پوشش
طبقه بندی
جنگلهای شمال
دادههای ماهواره ای
ارزیابی صحت
Canopy Cover
Classification
satellite data
Training sample
Accuracy assessment
Caspian forests
per
مؤسسه تحقیقات جنگلها و مراتع کشور
تحقیقات جنگل و صنوبر ایران
1735-0883
2383-1146
2005-09-23
13
3
352
343
108502
Scientific article
اثر فاصله کاشت بر تولید در هکتار ارقام مختلف صنوبر P.nigra L.
Effects of spacing on yield of various clones of Populus nigra L.
احمد همتی
ahemmati@rifr-ac.ir
1
علیرضا مدیر رحمتی
2
اعضاء هیأت علمی مؤسسه تحقیقات جنگلها و مراتع
اعضاء هیأت علمی مؤسسه تحقیقات جنگلها و مراتع
به منظور تعیین مناسبترین فاصله کاشت با حداکثر تولید در واحد سطح، این بررسی با تعدادی ارقام پر محصول صنوبر خارجی در اسفند 1372 در اراضی صنایع کاغذ غرب واقع در هرسین کرمانشاه به اجرا درآمد. در این آزمایش چهار فاصله کاشت 2×1 و 2×2 و 3×2 و 4×2 متر با سه کلن صنوبر از کشور ترکیه به شمارههای 135/63 Popuplus nigra، 154/62 P. nigra، 172/62 P. nigra و یک کلن شاهد بومی 78/42P. nigra در قالب طرح آزمایشی بلوکهای کامل تصادفی در سه تکرار شامل 25 اصله نهال با ریشه و ساقه یکساله به صورت ردیفی 5×5 کاشته شدهاند. اندازهگیریها عبارتند از ارتفاع بر حسب متر و قطر برابر سینه بر حسب سانتیمتر و محاسبه حجم در هکتار. نتایج بدست آمده در فواصل مختلف پس از 8 سال به شرح زیر است: در فاصله کاشت 2×1 متر کلن 135/63 P. nigra با میانگین 54 متر مکعب در سال و در هکتار؛ با کمترین قطر برابر سینه معادل 3/11 سانتیمتر بیشترین حجم را تولید کرده است. کلن 135/63 P. nigra با تولید 3/34 متر مکعب در سال و با میانگین قطر برابر سینه 13 سانتیمتر بیشترین حجم را در فاصله کاشت 2×2 متر داشته است. در فاصله کاشت 3×2 متر کلن 154/62 P. nigra با میانگین قطر برابر سینه 9/13 سانتیمتر و با رویش حجمی 29 متر مکعب بهترین رقم پرمحصول در این فاصله بوده است. در فاصله کاشت 4×2 متر کلن 135/63 P. nigra با میانگین قطر برابر سینه 2/15 سانتیمتر، 25 متر مکعب تولید سالیانه داشته است.
In order to determine the optimal spacing in respect to maximum wood production in unit area, an experiment was conducted in 1993 at West Paper Industries Co. site (West Iran), using a number of high yield exotic poplars under statistical design of factorial with three replicates. The factors consisted of spacing at four levels (1×2, 2×2, 2×3 and 2×4 m.) and Populus nigra with four clones (exotics: 62/172, 62/154 and 63/135 and native (control): 42/78). Every plot contained 25 seedlings of one year old root and stem. The growth parameters consisted of height, breast height diameter and volume which were measured and recorded annually, up to eight years. The best poplar clones in respect to maximum wood volume production at each spacing treatment were as follows: 1×2 m. spacing: P. nigra 63/135 with 54 m3/ha/y and 11.3 cm DBH 2×2 m. spacing: P. nigra 63/135 with 34.3 m3/ha/y and 13 cm DBH. 2×3 m. spacing: P. nigra 62/154 with 29 m3/ha/y 13.9 cm DBH. 2×4 m. spacing: P. nigra 63/135 with 25 m3/ha/y and 15.2 cm DBH.
https://ijfpr.areeo.ac.ir/article_108502_639ff34ca2542f09030bc74dbcbd94ea.pdf
کلن صنوبر
فاصله کاشت
رشد قطری
رشد ارتفاعی
حجم در هکتار
Poplar
Clone
spacing
DIAMETER
height
volume
per
مؤسسه تحقیقات جنگلها و مراتع کشور
تحقیقات جنگل و صنوبر ایران
1735-0883
2383-1146
2005-09-23
13
3
378
353
108509
Scientific article
مقایسه سیکل بذردهی راش بر اساس آنالیز تنه در راشستانهای مناطق کلاردشت، گرگان و سنگده
Determination of seeding cycle by stem analysis of three beech stands
علیرضا میربادین
1
منوچهر نمیرانیان
mnamiri@ut.ac.ir
2
عضو هیأت علمی مؤسسه تحقیقات جنگلها و مراتع
عضو هیأت علمی دانشگاه تهران
به منظور تعیین دوره بذردهی راش در جنگلهای شمال کشور در مناطق کلاردشت، گرگان وسنگده تعداد 85 اصله درخت راش در وضعیت اجتماعی چیره به صورت نمونه انتخاب گردیدند و پس از انجام برداشتهای کمی و کیفی از آنها، نمونهبرداری از خاک و رستنیها، درختان قطع و از محل برش (کنده) دیسکی به ضخامت 20 سانتیمتر قطع و مورد بررسی قرار گرفت. سپس دوایر سالیانه در دو جهت عمود بر هم اندازهگیری شده و تجزیه و تحلیل شدند. نتایج بدست آمده به شرح زیر است: 1- راش درهر سه منطقه مورد مطالعه دارای دو نوع بذردهی «فراوان» و «جزیی» میباشد. 2 – حداقل سن بذردهی بین 30 تا 35 سالگی است که اغلب با بذردهی جزیی شروع میشود. 3 – بسته به هر منطقه بذردهی فراوان ازسن 60 تا 75 سالگی به بعد شروع میشود. 4- رفتار درختان در بذردهی بسیار متفاوت است. بدین مفهوم که درمناطق مختلف و حتی در یک منطقه دارای بذر دهی یکسان نیستند. 5- بذردهی جزئی هر 1 تا 3 سال یکبار رخ میدهد و بذردهی فراوان هر 3 تا 9 سال یکبار حادث میگردد. البته اختلافات جزیی میان سه منطقه مشاهده میشود. 6 – این تحقیق روشن میسازد که برای استقرار زادآوری طبیعی بهتر است تا به دورههای بذردهی جزیی در طرحهای جنگلداری بیشتر اتکا شود و میتوان انتظار داشت که تجدید حیات طبیعی جنگلهای راش با بذردهی جزیی به دلیل تعدد وقوع تحقق پذیر باشد. 7 – در خصوص میزان کاهش رویش و دوره بذردهی با در نظر گرفتن آب و هوا سه طبقه قابل تشخیص است. در این خصوص برای سه منطقه مورد بررسی اختلافات جزیی دیده میشود: الف – در صورتی که میزان کاهش رویش دوایر سالیانه کمتر از 74/0 میلیمتر باشد، سال بذردهی تلقی نمیگردد. ب – در صورتی که میزان کاهش رویش دوایر سالیانه بین 74/0 تا 5/1 میلیمتر باشد، سال مربوطه میتواند مربوط به بذردهی جزیی باشد. ج – در صورتی که میزان کاهش رویش بیش از 5/1 میلیمتر باشد، سال بذردهی فراوان محسوب میگردد.
Three natural stands of beech (Fagus orientalis Lipsky) at different parts of Caspian Forests of Iran (Kelardasht, Sangdeh and Gorgan) were chosen to determine their seeding cycle by stem analysis. For this reason, 85 dominant trees were selected randomly from the stands. After measuring the tree's quantitative and qualitative properties and sampling soil and vegetation from the stands, the dominant trees were fallen down. A disc (20 cm thick) was removed from base of each fallen tree (cross cut), in order to study the annual rings at two directions, particularly annual diameter increment. After analysing the data, the results were as follows: 1- Two types of seeding were determined for F. orientalis at the three sites: heavy and light seeding. 2- Seeding started at age of 30 to 35 year when seed production is often light. 3- Based on the sites characteristics, the heavy seeding started at age of 60 and extended to ago of 75 year. 4- The trees had different seeding characteristics due to their different site characteristics and their different performance. 5- The light and heavy seeding cycles repeats every 1-3 and 3-9 years, respectively. The difference between the sites was not significant. 6- Natural regeneration of beech is more correlated to light seedling cycle will be due to its more frequency than the heavy seeding cycle. 7- There were three kinds of relationship between annual diameter increment and seeding cycles as follows: a- If the annual diameter increment is less than 0.74 mm, no seeding cycle will be expected. b- If the annual diameter increment is between 0.74-1.5 mm, light seeding will be expected, but if its diameter increment is more than 1.5 mm, heavy seeding will be expected.
https://ijfpr.areeo.ac.ir/article_108509_d8548fbd11f4ead816c5719f75804a1d.pdf
راش
سیکل بذردهی
زاد آوری
رویش قطری
beech
Caspian
seeding
cycle
regeneration
Diameter growth
Disc
per
مؤسسه تحقیقات جنگلها و مراتع کشور
تحقیقات جنگل و صنوبر ایران
1735-0883
2383-1146
2005-09-23
13
3
384
379
109303
مجموعه چکیده انگلیسی مقالات
Abstracts
Phenology of Quercus brantii (Lindl.) at Kurdistan Forests of Iran
Abstract
Phenological characteristics of Q. brantii were investigated at two different sites of Kurdistan Forests (Baneh and Marivan), each at three levels of altitude (1200-1400, 1400-1600, 1600-1800 m. absl) and two aspects (North and South), during 1995-2002. Overall, 10 Plots (1.0 ha), each containing 10 healthy trees were used for recording the phenological parameters. The data were analyzed statistically, using the Minitab computer program. The species phenological characteristics were as follows: Leaf and flower buds opening period: 2nd-4th week of April, the fruits start growing at 3rd-4th week of August and Mature at 1st-2nd week of November, leaves fall at 2nd-4th week of Nov., fruits fall at 3rd-4th week of Nov. The statistical analysis showed that there were significant differences between the phenological characteristics in respect to the different site physiographical characteristics. Furthermore, there were significant negative correlations between average rainfall and average air temperature and three of the phenological characteristics (leaf and flower appearance date and flowering amount). The correlation between average air temperature and leaf mature and fall date and flower or fruit amount was significantly negative.
Keywords: altitude, aspect, flower, fruit, leaf, temperature, rainfall, Phenology, Quercus barantii
Plant species diversity in relation to physiographical factors at Dehsorkh Woodland
Abstract
Species diversity is an important characteristic of bio-communities. Organisms diversity, diversity measurement and hypothesis test in relation to diversity causes are issues which the ecologists are interested in for long period. The aim of the trial was to study plant species diversity in Dehsorkh woodland at Javanroud, Kermanshah province, Iran. For this reason 300 sampling plots were used from which 60 at 256 m2 and 240 at 2.25 m2 area. At each plot six diversity indices (Shannon's (H), Simpson's reciprocal, Hill's N1, Pielou's (J/), Alatalo's F and Molinari's G) with respect to physiographical factors (slope, aspect and altitude) were investigated. The results showed that species diversity was the greatest at north aspects and slopes less than 30% and there was not significant difference between altitude and species diversity. The correlation between species number and indices analysis at each plot and the tendency and the role of each index at different analysis processes showed that the Simpson's reciprocal index is a best index for such research trials.
Keywords: Diversity, Physiography, Species, aspect, slope, altitude.
Direct and indirect effects of Poplar different attributes on its yield in early growth stage
Abstract
Direct selection of poplar clones for expanding their plantation is based on yield (wood production) evaluation. Because of limitations in site ecological characteristics which prevent desirable production, this method is not applicable. Therefore, indirect selection by studying other phenotypical characteristics which have well correlation with yield could be useful. The Path test for some of the morphological and growth factors was tested on one to two year old poplar clones seedlings in 2000 and 2001. At each experimental unit, five seedlings were selected to measure their following characteristics. Leaf number, leaf area, total leaf area, length of blade, maximum leaf width, width/length ratio, petiole length, depth of leaf rib, vein number, branch number, branch length, branch diameter, stem diameter, stem diameter/branch diameter, branch angle, height, root number, root length, new leaf number and survival. After a confident result of differences between the species and their clones, for the characters, Path analysis was performed on the data.
The results showed that branch number and branch angle had great direct effects on height as an independent variable. Branch number affected the height directly and negatively at high level, but its indirect effect on height through the dependent variables, was positive. As a result, the total effect on height was negative (-0.554).
Leaf number left high positive effect on height. The branch diameter/stem diameter ratio had the greatest total negative effect on height. As a result, stem diameter had the greatest positive effect on height. Survival had also a great indirect positive effect on height through independent variables, counterbalancing negative direct effects to a positive effect of 0.667. Branch length showed a high negative direct effect, but a high positive indirect effect, resulting a high positive total effect on dependent variable, height. However, total leaf area with positive direct and indirect effects on height, which is in turn the most influential character on height, would be the best indicator of height in the poplar species under study. This would be of high value, particularly when a great number of clones are under investigation at early stages of a cultivation programme.
Key words: Poplar, Path analysis, Morphological attributes, direct and indirect effects.
Estimating forest canopy cover using Landsat7 ETM+ data
Abstract
The remotely sensed data is one of the most rapid methods for providing thematic maps in natural resources, especially forest. By combining ETM+ data and ground observation data, we can have access to thematic maps of forest such as canopy cover map, that it can be used in forest ecological studies and forest management and improvement.
The research was conducted to evaluate and investigate the possibility of using Landsat7 ETM+ data for developing forest canopy cover density map at four classes in four sites of Caspian Forests of Iran.
Based on OIF index and statistical analysis of the ETM+ data, Color composite 3, 4, 5 were selected for unsupervised and supervised classifications. Ground observation information was collected from 282 plots (150*150m), using unsupervised map as a primary map.
Finally, combining the ETM+ data and the ground information, using supervised classification method, canopy cover map was achieved at four classes (5-30%, 31-50%, 51-80%, 81-100%).
Evaluation of the canopy cover density percentage showed that the overall accuracy of the canopy cover percentage map developed by the Landsat7 ETM+ data and average accuracy, producer's and user's accuracy were: 85.43, 84.7 and 82.68 percent, respectively.
Keywords: Canopy cover, Classification, Satellite data, Training sample, Accuracy assessment, Caspian Forests.
Effects of spacing on yield of various clones
of Populus nigra L.
In order to determine the optimal spacing in respect to maximum wood production in unit area, an experiment was conducted in 1993 at West Paper Industries Co. site (West Iran), using a number of high yield exotic poplars under statistical design of factorial with three replicates. The factors consisted of spacing at four levels (1×2, 2×2, 2×3 and 2×4 m.) and Populus nigra with four clones (exotics: 62/172, 62/154 and 63/135 and native (control): 42/78). Every plot contained 25 seedlings of one year old root and stem. The growth parameters consisted of height, breast height diameter and volume which were measured and recorded annually, up to eight years. The best poplar clones in respect to maximum wood volume production at each spacing treatment were as follows:
1×2 m. spacing: P. nigra 63/135 with 54 m3/ha/y and 11.3 cm DBH
2×2 m. spacing: P. nigra 63/135 with 34.3 m3/ha/y and 13 cm DBH.
2×3 m. spacing: P. nigra 62/154 with 29 m3/ha/y 13.9 cm DBH.
2×4 m. spacing: P. nigra 63/135 with 25 m3/ha/y and 15.2 cm DBH.
Keywords: Poplar, clone, spacing, diameter, height, volume.
Determination of seeding cycle by stem analysis of three beech stands
Abstract
Three natural stands of beech (Fagus orientalis Lipsky) at different parts of Caspian Forests of Iran (Kelardasht, Sangdeh and Gorgan) were chosen to determine their seeding cycle by stem analysis. For this reason, 85 dominant trees were selected randomly from the stands. After measuring the tree's quantitative and qualitative properties and sampling soil and vegetation from the stands, the dominant trees were fallen down. A disc (20 cm thick) was removed from base of each fallen tree (cross cut), in order to study the annual rings at two directions, particularly annual diameter increment. After analysing the data, the results were as follows:
1- Two types of seeding were determined for F. orientalis at the three sites: heavy and light seeding.
2- Seeding started at age of 30 to 35 year when seed production is often light.
3- Based on the sites characteristics, the heavy seeding started at age of 60 and extended to ago of 75 year.
4- The trees had different seeding characteristics due to their different site characteristics and their different performance.
5- The light and heavy seeding cycles repeats every 1-3 and 3-9 years, respectively. The difference between the sites was not significant.
6- Natural regeneration of beech is more correlated to light seedling cycle will be due to its more frequency than the heavy seeding cycle.
7- There were three kinds of relationship between annual diameter increment and seeding cycles as follows:
a- If the annual diameter increment is less than 0.74 mm, no seeding cycle will be expected.
b- If the annual diameter increment is between 0.74-1.5 mm, light seeding will be expected, but if its diameter increment is more than 1.5 mm, heavy seeding will be expected.
Key words: Beech, Caspian, Seeding, cycle, Regeneration, Diameter growth, Disc.
Introduction of some of the ecological and silvicultural Characteristics of the forest areas of Kermanshah province
M. Khanhasani1, A. Jalili2, Y. Khodakarami1 and A. Tavakoli3
Abstract
Climate, plant and soil diversity during ecological development, resulted in complex ecosystems at Zagros zone of Iran. Different forest types diversity from north to south of Zagros, is a good evidence for that case. The importance and the critical role of this ecosystem on economical, social and environmental prospectives of the country, makes it essential to study and investigate the zone comprehensively. However, investigation on relationship between plant cover and the ecological factors which affect the zone, can lead to a better knowledge of the zone.
In vestigation on tree, shrub and grass species autecology at these forest is highly important in order to identify forest distribution of the province according to climate diversity, the climate map (according to the important climate method of de Martonne) was matched with the topographical map of Iran, then controlled by forest walking. The tree, shrub and herb species characteristics and some of the edaphic and topographical parameters were studied using 126 macro plots (500 m2) and 630 micro plots (105 m2), the sampling plots were located on contour lines at loo m. altitude intervals.
Overall, 13 forest sites at six climate types were identified, based on the applied research parameters, dominant slope direction and 1000 m. distance between the sample plots at each contour line, including: Bayangan & Gahvareh with cold humid climate, Islam – Abade – garb, Darbadam and Geomarg with semi – humid cold climate Tazehbad with very humid cold climate, Ghalajeh with semi humid ultra cold climate, Javanrood with 2 climate types; humid temperate and humid cold and finally five sites: Chaharzbar, Harrasam, Sarv -e- no, Sarpole - e - zahab and Qeymas with semi dry cold climate. Moreovoer, it was identified that: The greatest and the lowest density of the tree and shrub species belonged to Harrasam (semi – arid cold climate) and Galajeh (semi – humid ultra – cold climate), respectively.
The highest and the lowest density of the seed origin forests, belonged to Tazeabad (very humid cold climate) and Sarv-e – no (semi – arid cold climate), respectively.
The greatest and the lowest percentage of forest crown cover belonged to humid cold and humid temperate climates of Javanroud, respectively.
Key words: Ecosystem, Zagros forests, Kermanshah, silviculture, Ecology.
Height growth behavior of Poplar clones in Kurdistan
B. Yousefi1 and A. R. Modir-Rahmati2
Abstract
In this study, saplings of eight poplar clones from six species including (Populustrichocarpa, P. nigra cv. Kamyaran, P.n.56.72, P.deltoides 63.3, P.euramericana 488, P. alba cv. Kabudeh Bumi, P. a cv. Kabudeh Shirazi and P. euphratica)have been evaluated for height growth in Zalleh station of Sanandaj in Kurdistan province. Based on nested design with eight treatments and 10 replicates, the study was carried out in 2001.
The results showed that there was significant difference between the species height performance P.d.63.3 (234.4 cm) and P.euphratica (78.8 cm) greatest had the and the lowest height growth, respectively.
Based on the results, there were three different growing season stages for height growths in poplars, including: 1-primary slow growth stage prior June, 2-fast growth stage during June - September and 3-secondry slow growth stage after September. The daily height growth rate of the poplar clones in mentioned stages were 25.77, 101.57 and 14.52 cm, respectively. P.d.63.3 as a superior clone among the other clones, had low growth at the first and the third stages but very high growth at the second stage. P. Trichocarpa finished the third second stage earlier than the others at July and P.e.488 showed high growth at the first and stages, but low growth at the second stage.
Considering climate condition of Sanandaj in 2001, the studied Poplar clones began the first stage at average daily temperature of 13ºC and average photo radiation period of hour per month (h/m), as well as the second stage at 25 ºC and 370 h/m and the third stage at 10 ºC and 220 h/m.
Key words: Poplar, Populus, clone, Height growth, climate, radiation
Effect of environmental conditions on survival of Capparis decidua seedlings
Gh. R. Damizadeh1
Abstract
Ripe fruits of Capparis decidua (Forssk.) Edgew.were collected from the species natural habitat in Sirik at Hormozgan Province (June, 2001).
After rubbing and washing the seeds, they were sowed in a nursery in order to test the seeds germination and the seedlings survival. The statistical method was factorial with completely randomized design, consisting of two factors. The first factor was seed treatments which consisted of four levels (12 hours soaking in concentrated sulphuric acid, 45 minutes soaking in concentrated sulphuric acid and full fruit sowing). The second factor was soil mix treatments which consisted of 12 levels (sand, garden soil, clay manure and natural habitat soil). Moreover, correlation between climate parameters (temperature, relative humidity % and monthly evaporation) and edaphic parameters (organic matter %, sand % slit % and clay %) on one hand seedlings survival % on another hand were studied. The results showed that the effects of seed and soil mix treatments on seedling survival were significant (p<0.01) and the best seed treatment was soaking seeds in water s=for 12 hours which resulted in 59.4 % seedling survival. The best soil mix treatments were number, 9(2.3% of sand + 1.3% of garden soil) and number 1(1.2% of sand + 1.2% of garden soil) which resulted in 55.8% ND 51.3% seedling survival, respectively. The effects interactions between the seed and soil mix treatment were not significant the correlation between air temperature, sand % and seedlings survival ^ was positively significant, whereas the correlation between silt %, clay and seedlings survival % was negatively significant (p<0.01).
Keywords: Capparis decidua (Forssk.) Edgew., seed treatment, soil composition, germination, vitality.
Site demands of False walnut (Pterocarya fraxinifolia (Lam.) Spach) in ((Vaz)) Experimental Forest of
Mazandaran province
E. Ebrahimi1,Kh. Sagheb – Talebi2 and Y. Gorgi - Bahry3
Abstract
((Vaz)) research forest, one of the most important sites of False walnut in Noor Township and Chamestan District was selected for the study. The distribution areas of False walnut at Vaz forests were marked on a topographical map. False walnut grows usually with other species such as Alder, Persimmom, Caspian poplar, iron wood, mape and hornbeam. with regards to False walnut site condition and its distribution in special parts of the forests, selection of sample plots was not done randomly, but was made manually through recognition of areas, where the False walnut was dominant. The quantitative and qualitative characteristics of the individual trees were measured and recorded within the sample plots with an area of 1000 m2.
The results show that False walnut grows often on clay – deep soils, northern slops of 5 – 10% gradient, altitudes of 500 – 1000 m.a.s.l. and river banks and valley sides with low gradient slope. Vaz forest contains the upper distribution limit of this species in the Caspian region, where it appears up to 1330 m.a.s.l.
Mean stock volume of the studied stands was 415 silve per ha, which 55.6 and 22.9% of it belong to False walnut and Alder species, respectively. In view points of species composition, the False walnut, Persimmom and Alder contributions were 56.4, 14.5 and 8.0%, respectively. The average annual diameter and height growth rate differed at different age stages. For instance, the maximum height growth was at age of 20 year and over 55 year. The False walnut density was 142 stem number per ha, which increased up to diameter class of 35 cm and then decreased over this class. More than 80% of the False walnut trees contain diameter of l0 to 45 cm. Despite of the high density of False walnut seedlings, regeneration was not satisfactory and was generally asexual (root sucker).
False walnut trees grow as over as over storey form in most of its sites of the Caspian Forests with Alnus subcordata C.A.M., Alnus glutinosa Gaetn, Acer velutinum Boiss, Carpinus betulus L., Populus Caspica Bornm., Fraxinus excelsior L. and Juglans regia L., but in the investigated sites grow as two storey from. The False walnut qualitative characteristics (stem straightness, natural prunning and crown symmetry) were not desirable. Sixteen percent of the studied trees were attacked by pests and diseases, decayed or had crown breakage.
Key words: False walnut, site demand, diameter, height, growth, regeneration, Caspian forest.
Effects of spacing treatments on production of Poplar and alfalfa in intercropping method
F. Asadi1, M. Calagari1, R. Ghasemi1 and R. Bagheri1
Abstract
Poplar species are usually cultivated for their wood production in most areas of Iran. They are traditionally planted with low spacing which does not render thick trees.
Moreover, for different reasons, increasing poplar spacing is not accepted by people and the farmers before accepting a new system, pay high importance for earning continuous income. Thus, addfitional income besides wood products is a vital factor to inrcease the public acceptance for poplar intercropping system. Therefore, intercropping poplar and fodder with increased spacing in order to increase under Randomized Compelete Block Design in 1998 with three replicates, using seedlings of P. nigra betulifolia, four spacing treatments (3×4, 3×6.66, 3×8 and 3×10m.), intercropped alfalfa and two monocultured control treatments of poplar and alfalfa.
The trial continued to 2003. Each plot area was 1200 m2. Ten different growth parameters the poplar and alfalfa species were measured. The data were analyzed, using the univariate and the multivariate statistical methods.
The results showed that the effect of treatments on poplar and alfalfa parameters were the greatest poplar height and volume amounts belonged to the spacing treatments of 3×4, 3×8 and 3×6.66m which were 1541, 141, 136 cm and 31.7, 20 and 19m3, respectively. The greatest production of alfalfa belonged to control, 3×10 and 3×8 m. spacing treatments which were 7507, 4788 and 4265 Kgha-1 biomass dry weight. The effects of the treatments on branch diameter and annual stem diameter growth rate were not significant, whereas the effects of time and interaction between time and treatments on some growth parameters were significant.
Key words: Agro forestry, Intercropping, Poplar, Alfalfa
Primary Research on establishment of olive seedlings at rainfed condition
H. Sardabi1
Abstract
The aim of the study was to examine the effect of one-year old olive seedlings (O. europaea L.) grown in pots under compacted soil and water deficiency conditions, on its subsequent survival and growth at field and rainfed circumstances. Compacted soil usually restricts seedlings root development, particularly in pots. The hypothesis was that the restricted and stressed roots might penetrate the soil layers deeply and widely after plantation at field condition. This means more availability of water and nutrition to olive seedlings and successful plantation at rainfed circumstances. The trial was conducted at two stages, including invivo and in situ in the Iranian National Botanical Garden at Tehran in 2002. Overall, 36 polyethylene sewerage pipes were used as pots (65 and 10 cm height and diameter, respectively) in the in vivo stage. The stress treatments were two levels of soil compaction (bulk densities of 1.3 [low] and 1.6 [high] g/cm3) and two irrigation period intervals (three [wet] and six [dry] days). The pots were grouped to two level sections and each section was filled with one of the levels of the compacted soil (sandy clay loam) up to 50 cm height. The seed propagated seedlings were transferred into the 36 pots and the two irrigation treatments were applied to the pots at each compaction level, separately under glasshouse condition.
Before transplanting the seedlings into the designed site in March 2003, the soil was tilled deeply at two directions by tractor. The planting holes were dug at 3 by 3 m. spacing system, using a tractor drill. The site soil type was sandy with more than 50% gravel content. The experimental design was Factorial under completely randomized blocks with two factors (compaction and irrigation preplanting treatments), two levels and three replicates. There were three seedlings in each plot. The effects of the treatments on seven shoot and root parameters were measured. The seedlings were harvested on January 2004. Except after transplanting, the seedlings have not been irrigated during the trial.
The results show that the seedlings survived successfully (100%) during the growth period, particularly under high drought stress, but without significant differences between the preplanting treatments. Irrigation and compaction did not have significant effects on shoot and root growth parameters, whereas their interactions had significant effects (р<0.05) on only four seedling growth parameters, including shoot height and dry weight, leaf dry weight and root/shoot ratio. The greatest mean of shoot height and leaf dry weight belonged to seedlings pretreated with high levels of compaction and water stress. The highest mean of shoot dry weight achieved in seedlings pretreated with high level of water stress and low level of compaction or high level of compaction and low level of water stress (20.7 and 19.76 g, respectively). The greatest mean of root/shoot ratio belonged to seedlings pretreated with high level of water stress and soil compaction (0.84).
It could be concluded that although both the compaction and drought preplanting stresses did not significantly influence survival, but they significantly affected shoot and root growth parameters. Therefore, the results can be applied for most of the semi-arid zones, using preplanting deep tillage method at two directions and after planting mulch cover for soil surface.
Key words: compaction, drought stress, Olea europaea, rainfed, root, soil.
The study of wild Pistacia distribution in Markazi Province
H. Zahedi Pour1, M. Fatahi2, H. Mirdavoodi3, G. Godarzi3
and Z. Azdoo4
Abstract
Considering appropriate adaptability of different wild species of Pistacia in different Arid and Semi-Arid environment of the country as well as its high value from the point of view of Resin and other chemical production, oil, and pharmacological consumption of their seeds, founding their habitats in the different areas of Markazi Province seems to be important. In this project first of all, the basic information including topographical, soil, climate, geological, and land use map of the area with 1/50000 scale were prepared and digitized. Then all the areas which have covered by wild Pistacia were visited and recorded by GPS and then digitized. In order to study the quantity and quality characteristics of the species, some sample were taken from 1600m2 in some distributed areas of wild Pistacia according to different climatic condition of the Province. The parameters, such as the number of trees in the samples, trees height, trees width, trees diameter in height breast, the crown height and diameter, growth type and,etc were recorded in sampling areas. After establishing the DEM of the areas, aspect and slope map were also produced using dfdx and dfdy filter in ilwis academic program Package.
On the basis of this investigation the following results were obtained.
20 polygons of wild species of wild Pistacia with total areas of 2216 ha were recognized in Makazi Province of Iran.
The species-environment relationship including: slop, acpect, climate, landuse and soil were determined using maps integrating and data overlying.
1- Research Expert, Agricultural and Natural Resources Research Center of Kermanshah Province, I.R. Iran. E-mail: sonia – khanhasani@yahoo.com
2- Member of Scientific Board, Research Institute of Forests and Rangelands, I. R. Iran.
3- Member of Scientific Board, Agricultural and Natural Resources Research Center of Kermanshah Province, I.R. Iran.
1- Scientific Board Member, Research Center of Agriculture and Natural Resources of Kurdistan Province, P.O Box 66169-36311, Sanandaj, I.R. -Iran.
E-mail: Bayzidyousefi @ Yahoo.com
2- Scientific Board Member, Research Institute of Forest and Rangelands, P.O.Box 13185 -116, Tehran, I.R. Iran. E-mail: Modir -Rahmati@rifr-ac.ir.
1- Research Expert, Agriculture and Natural Resources Research Center of Hormozgan Province, Bandar – Abbas, I.R. Iran.
1- Research Expert, Agricultural and Natural Resources Research Centre of Mazandaran province (ANRRCMP), SARI, I.R. Iran.
2- Member of Scientific Board, Research Institute of Forests and Rangelands, I. R. Iran. E-mail: saghebtalebi@rifr-ac.ir
3- Member of Scientific Board, ANRRCMP.
1- Scientific Board Members, Research Institute of Forests and Rangelands, P.O. Box 13185-116, Tehran, Iran. I.R. E-mail: F. Asadi@rifr-ac.ir
1- Scientific Board Member, Research Institute of Forests and Rangelands, P.O.Box 13185-116, Tehran, I.R. Iran. E-mail: sardabi@rifr-ac.ir
1- Associated Prof. Of agricultur and natural resources research center of Markazi Province E-mail: frahani39@yahoo.com
2- Member of scientific board of forest and rangeland research institute of Iran
3- Member of scientific board of agricultur and natural resources research center of Markazi Province
4- Expert of agricultur and natural resources research center of Markazi Province
https://ijfpr.areeo.ac.ir/article_109303_9e67057b743f3c8bf5a9908082096d11.pdf